CST's Portable Weighbridge brings the check weigher TO the customer. The Portable Weighbridge can be easily assembled on any hard ground in around 6 hours. For temporary installations steel plates are provided to support the base. Regular jobs are usually set up on concrete footings. The Portable Weighbridge can be assembled using a standard yard crane with 3 tonne lifting capacity.

The weighbridge is a modular design and is shipped on a flat-top semi trailer or low loader.

Portable Weighbridge configurations/specifications:

• A single 30 tonne unit. This set-up is sized to handle a vehicle up to 9 metres long and 3 metres wide, generally a standard ten tonne tip truck.
• A 3 metre wide x 18 metre long weighbridge that can accommodate 60 tonnes and a semi tipper truck.
• Two separate weighbridges side by side, which can handle a vehicle carrying loads to 60 tonnes, up to 9 metres long and any width, generally an articulated vehicle or mine truck. This configuration has a capacity of 60 tonnes.
• Accurate load cell combined error of 5kg at 30 tonne
• Guaranteed accuracy with on-site calibrations
• Guaranteed accuracy of <0.08%

Transport and Assembly of Weighbridge

• The weighbridge is a modular design and is shipped on a flat top semi trailer or low loader.

• The weighbridge can be easily assembled on any hard ground in around 6 hours.

• For temporary installations steel plates are provided to support the base. Regular jobs are usually set up on concrete footings.

• The Portable Weighbridge can be assembled using a standard yard crane with 3 tonne lifting capacity.

Types of applications:

• Reconciliation of product with two different customers. The CST Portable Weighbridge can be used as an independent method to test the weighers. Material is loaded into a truck and weighed then passed over the site weighers. The discrepancy with the weighers can then be checked against specifications.

• Determining losses in process. The Portable Weighbridge can be used on remote sites where there is no belt weigher on the discharge conveyors to determine what the losses are in the site process.

• Trade certification of belt weighers using portable Weighbridge. The CST Portable Weighbridge can be used to trade certify belt weighers. It can be used as an accurate control instrument with its design well within the MPE (maximum permissible error) for the tests.

Testing of the Weighbridge:

• The weighbridge when assembled is tested using certified test weights.
• The weighbridge itself is presently not trade certified but can be used as a control instrument with a guaranteed accuracy of better than .08%of full load.
• Depending on demand the weighbridge can be trade certified.

Benefits of the CST Portable Weighbridge:

• The weighbridge is able to set it up at any location close to the area of interest.
• Tests are now easily conducted on material and processes that would otherwise have been too difficult to do so.
• Saves time and transport costs to nearest weighbridge location.
• CST service technicians have the training and experience to carry out the test weighing with minimum disruption and maximum efficiency.
• Reassurance for customer re accuracy of site weighers and/or process control.
• More accurate monitoring of plant input, output, and stockpile levels.
• External confirmation of weighing data for reconciliation of customer accounts.

Rates:

• Weekly Hire Rates available
• Installed on site, when and where you need it!